Size: Typically applied in thicknesses ranging from 200-500 microns per coat.
Grade: High-performance epoxy or polyurethane-based coatings.
Viscosity: Adjustable, usually between 50-100 KU (Krebs Units) for spray application.
Buoyancy: Not applicable; coatings are non-buoyant and designed for corrosion protection.
Material: Epoxy, polyurethane, or hybrid polymers with anti-corrosive additives.
Density: Approximately 1.2-1.6 g/cm³ depending on formulation.
Adhesion Strength: ≥5 MPa (ASTM D4541).
Abrasion Resistance: ≤50 mg loss (ASTM D4060, CS-10 wheel, 1000 cycles).
Chemical Resistance: Resistant to seawater, oils, and mild acids/alkalis.
Cure Time: 4-24 hours (varies with temperature and humidity).
Service Temperature: -30°C to +80°C (continuous exposure).
Solids Content: 60-80% by volume (VOC-compliant formulations).
Certifications: IMO PSPC, NORSOK M-501, or equivalent marine standards.
